2009年3月16日星期一

Quantum solitons (转载)

Quantum solitons (转载)

转载自http://physicsworld.com/cws/article/print/1285

Quantum solitons

Two of the most remarkable properties of light - squeezing and solitons - are being combined in a new generation of experiments that could revolutionize optics and communications.

One of the most remarkable sights over Europe in the spring is the migration of large groups of birds from the south. Each group is composed of individuals of different strengths and speeds yet, thanks to an aerodynamic trick, they manage to move together as a group. The trick is to fly in a tight V-shaped formation in which the strongest and fastest birds stay at the front. These birds take the brunt of the air resistance, which slows them down. The weaker birds fly behind the leaders, taking advantage of the low-pressure region behind the stronger birds. This allows the weaker birds to move faster and with less effort. The overall result is that the group moves as a whole without dispersing, held together by air pressure at a uniform velocity.

A similar trick can be played by photons as they travel over intercontinental distances in optical fibres. In these systems, photons can fly in special bell-shaped pulses known as solitons. Solitons rely on the fact that the refractive index of the fibre - which determines, among other things, how fast light can travel in the fibre - depends on both wavelength and intensity.

Each pulse is composed of photons of different wavelengths. These wavelengths travel at slightly different speeds because the refractive index of the fibre decreases with wavelength at the infrared wavelengths used in fibre communications. This chromatic dispersion produces a "chirp" - blue wavelengths travel faster and move to the leading edge of the pulse, while longer red wavelengths travel slightly slower and stay at the trailing edge. Ultimately this chirp causes the pulse to spread.

Like the migrating birds, however, the photons can exploit another effect - in this case the nonlinearity of the fibre. This results from the fact that a small fraction of the refractive index depends on the intensity of the light travelling through the fibre. The fibre nonlinearity means that the peak of the soliton pulse experiences a higher refractive index than the rest of the pulse and is therefore delayed with respect to the "wings". This produces a chirp that opposes that caused by the dispersion in the fibre. Thus the variation of the refractive index with both wavelength and intensity keeps the pulse together. This delicate balance between chromatic dispersion and the nonlinearity of the fibre occurs for pulses with a very specific shape (see The basics of solitons).

Thanks to the compensation of chromatic dispersion by the fibre nonlinearity, soliton pulses can travel thousands of kilometres without changing their shape, provided that they are periodically re-injected with energy to compensate for losses. In optical communications systems this energy is supplied by erbium-doped fibre amplifiers that are spaced every 50-100 kilometres or so along the fibre.

Quantum noise

The capacity to travel without spreading, especially over long distances, has made solitons prime candidates for transmitting information. However, reaching the destination in good shape is no guarantee that information is transmitted faithfully because, in addition to any spreading of the pulse, the information has to fight against noise. Most of the noise is usually due to technical imperfections, such as random strains in the fibre or fluctuations in the lasers generating the pulses, and can generally be eliminated by improving the components in the system. But there is also a fundamental and unavoidable source of noise that cannot be eliminated by technical improvements: this is the noise due to the quantum mechanical nature of light.

Quantum noise is a consequence of the uncertainty principle, and arises because there is a quantum mechanical "incompatibility" between the generation and the detection processes for light pulses. Solitons are made of coherent light, which is the "purest" light that a laser can deliver. The electric field of a coherent state has a non-zero expectation value that oscillates sinusoidally in time, just like a classical oscillating field.

The detection of solitons is performed by a photodiode. This device measures energy and therefore essentially counts the number of photons, N, in the soliton. The quantum eigenstates associated with these eigenvalues are called number states. However, a coherent state is not an eigenstate of the photon-number operator and must therefore be expressed as a superposition of all possible photon-number states. This means that when a coherent soliton pulse is detected, the most likely outcome of the measurement will be N but, in general, a different result will be obtained each time a measurement is made. This uncertainty in the values measured in such experiments is often referred to as quantum noise.

Quantum noise is usually illustrated by making the classical picture of the field "fuzzy" to an extent prescribed by the Heisenberg uncertainty principle. For example, a coherent soliton can be represented as a superposition of a classical hyperbolic secant (I(t) = P1/cosh(t/T0)) light pulse and the quantum fluctuations of the field (figure 1).

Clearly, this "noise" does not arise from any technical imperfection of the instrumentation, but is simply due to the fact that laser emission and light detection involve two different observables - the amplitude of the electric field and the energy of the pulse - that do not have common eigenstates. The noise power level in such a measurement is proportional to the variance of the photon-number distribution. Since this distribution obeys Poisson statistics for a coherent state, the noise power level is proportional to N , the mean number of photons in the pulse. The particular noise power level associated with a coherent state is also known as the "shot noise" (see What is shot noise).

The quest to reduce the quantum noise in solitons has been going on for about a decade, based on ideas proposed by Marc Levenson, then at the IBM Almaden Research Centre in San Jose, California. Levenson's ideas were further developed by Herrmann Haus of the Massachusetts Institute of Technology (MIT) in the US and by Peter Drummond of the University of Queensland in Australia.

These ideas were based on the concept of "squeezing", which is closely linked to the uncertainty principle. Consider, for example, the uncertainty relationship between position, x, and momentum, p. According to the uncertainty principle, DxDp >= h/2, where Dx and Dp are the uncertainties in position and momentum, and h is the Planck constant. A similar relationship exists between the photon number, n, and phase, f, in an electromagnetic field. In this case the uncertainty relation can be written roughly in "shot-noise units" as DnDf >= 1.

When the equality sign holds in the Heisenberg relation - for example Dx Dp = h /2 - we have a "minimum-uncertainty state" that does not have any excess noise. A coherent state is a very special kind of minimum-uncertainty state in which the uncertainties in any pair of "conjugate" variables are equal (e.g. Dn = Df = 1). The basic idea behind squeezing is that it is possible to construct other kinds of minimum-uncertainty states by reducing the uncertainty in one variable at the expense of increasing the uncertainty in the other variable, while still satisfying the equality (e.g. Dn < face="Symbol">Df > 1, but Dn Df = 1). Squeezing was achieved in the laboratory for the first time in 1985 by Dick Slusher and co-workers at Bell Labs in the US, and since then a large number of squeezing experiments on different aspects of the electromagnetic field have been reported.

The first experimental demonstration of soliton squeezing was reported by Michael Rosenbluh and Bob Shelby at IBM in San Jose in 1991. Rosenbluh and Shelby did not squeeze the photon number but rather the so-called in-phase quadrature of the soliton: this is the sine or cosine component of the soliton and it can be measured by combining the soliton with a stronger reference beam known as a "local oscillator" in an interference experiment. This early work was followed up by groups in other US laboratories, notably those of Erich Ippen at MIT and Keren Bergman at Princeton University.

In 1996 Stephen Friberg's group at the NTT Basic Research Laboratories in Japan squeezed the intensity (i.e. the photon number) of a soliton to 60% of the shot-noise level. Friberg and co-workers started with a pulse that contained slightly more energy than a fundamental soliton and then filtered away some of its spectral components to produce a squeezed soliton.

Recently a group led by Gerd Leuchs and Andreas Sizmann of the University of Erlangen-Nurnberg in Germany announced that it had squeezed the photon number of a soliton pulse even further - to 30% of the shot-noise level. In addition to being the current record for soliton squeezing, this feat was achieved with a simpler experimental set-up than that used at the NTT. Ultimately it should be possible to squeeze solitons to below 10% of the shot-noise level.

Inside the soliton

The main physical feature that makes soliton squeezing possible is the fibre nonlinearity. Indeed, in addition to serving as the "glue" that keeps the soliton together in the face of dispersion, the nonlinear interaction among the photons imparts quantum correlations that make the fluctuations of an observable in any two wavepackets in the soliton vary in unison, even though each individual wavepacket varies at random.

One way of understanding this is to view the nonlinear interaction among photons as a process in which pairs of photons annihilate each other to create a virtual state of polarization in the fibre. This virtual polarization disappears immediately to produce a pair of "twin" photons whose fluctuations are correlated. This process creates a "brotherly bond" among the photons that helps structure the soliton, and this persists even as the individual photons merge into the large crowd of other photons - just as family ties underlie the internal structure of migrating flocks of birds and persist for as long as each bird lives.

These quantum correlations have been demonstrated in recent experiments in Erlangen. Leuchs, Sizmann and co-workers "sliced" a soliton into 15 spectral intervals and measured correlation functions for the intensity fluctuations between pairs of these intervals. They measured all 105 pair correlation functions to construct a map of the intra-pulse quantum correlations (figure 2). This map showed that the photon-number fluctuations of the different spectral components of the soliton are very strongly correlated or anti-correlated (i.e. they either vary together in the same sense or in the opposite sense), as if they consisted of "twins". These experiments reveal one aspect of the intricate internal quantum structure of optical solitons that is at the root of squeezing. Armed with this knowledge the Erlangen group was able to reduce the noise power in a soliton to 30% of the shot-noise level.

Leuchs and colleagues used a fibre-loop interferometer in which the soliton is split asymmetrically (90/10) into two replicas that interfere with each other at the exit of the loop. The input-output characteristic curve of the loop displays several plateaus - regions for which the energy of the output pulse is almost independent of the input pulse energy. The interferometer therefore acts as an "optical limiter", producing pulses with a stabilized energy content.

The Erlangen group measured the quantum noise of these stabilized pulses by detecting them with a pair of photodiodes and looking at the fluctuations of the overall photocurrent at a frequency of 20 MHz. There should not be any signal or any technical noise in this frequency range, so any fluctuations observed can be attributed to the quantum noise of the detected pulses. The team found a noise level that was significantly lower than the shot-noise limit, indicating that the stabilization involved not only the mean pulse energy but also its quantum fluctuations (figures 3 and 4).

This experiment is striking for two reasons. First, it produced a high level of squeezing. Second, the experiment used run-of-the-mill fibre technology, which means that a device for squeezing solitons could be readily incorporated into a real fibre communications system.

The special stabilizing properties of asymmetric interferometers have been discussed by many theorists, including Yoshi Yamamoto of Stanford University in California, Akira Hasegawa of Osaka University in Japan and Nick Doran of Aston University in the UK, over the past 10 years. However, the Erlangen experiment is the first clear-cut demonstration of these stabilizing properties. Mike Werner of NTT in Japan has independently proposed the use of asymmetric interferometers to achieve many different types of soliton squeezing.

Solitons in action

Mastering the physics of the nonlinear refractive index of the fibre has been crucial for the development of high-bit-rate long-haul transmissions. Taking advantage of the fibre nonlinearity has produced a definite niche in transoceanic fibre communications for soliton-like pulses, even though the distinction between soliton and non-soliton pulses becomes blurred at high bit rates where nonlinear effects are important for all types of pulses (see Doran and Bennion in further reading). And although our understanding of the subtle interplay between the nonlinear interactions and the quantum fluctuations has not yet reached the stage where it can pass from research to development, we can already envisage potential areas of applications for the squeezed solitons.

In all these applications one has to bear in mind that squeezing is very fragile, and that the carefully tailored distribution of photons in the squeezed soliton goes back to the shot-noise level as losses gradually remove photons from the soliton pulse at random. However, even if the squeezing of solitons cannot survive for more than a dozen kilometres of propagation, it can be extremely valuable when it is alive.

One area of application concerns the transmission and processing of classical (binary) information, in which the presence or absence of a soliton in a time-window corresponds to a "1" or "0", as in traditional optical-fibre communications. However, since solitons occur at fixed power levels, we do not have the luxury of being able to crank up the input power to improve the signal-to-noise ratio at the receiving end. Nevertheless, the exploitation of quantum effects such as squeezing could help to reduce noise and improve fidelity.

In long-distance communications, where the signal is amplified every 50-100 kilometres or so, the soliton pulse is strongest just after the amplifier. Luckily this is where the bulk of the nonlinear interaction needed to maintain the soliton shape occurs. However, the pulse gets weaker as it propagates along the fibre, so the nonlinear interaction also becomes weaker and weaker. This means that dispersive effects become dominant until the next stage of amplification, where the nonlinearity takes over again. One problem is that quantum fluctuations in the amplifiers lead to random jumps in the central wavelength of the individual solitons, and this results in a random variation of the speed of individual solitons in the fibre.

Several schemes have been devised to remove this excess noise and bring the train of solitons back to the orderly behaviour characteristic of a stable coherent state (e.g. the solitons could be passed through a spectral filter). Photon-number squeezing could also play a key role in solving this problem. For example, if the solitons are number-squeezed immediately after amplification, there will be a smaller uncertainty in the nonlinearity that keeps the soliton in shape and, therefore, there will also be less noise in the soliton. This results in an improvement in the bit-error rate of the transmission. The fact that squeezing does not survive attenuation does not matter in this case, since it is alive during the nonlinear interaction - when it is needed.

Another possible application of squeezed solitons would be in switching devices and logic gates based on soliton interactions, such as the fibre-end devices for signal processing in telecommunications developed by Mohamed Islam at AT&T in the US in the early 1990s. The use of number-squeezing would allow collisions between solitons to be controlled to high precision, thus significantly reducing the error rate of these devices.

Solitons and quantum information

It might also be possible to use solitons in the processing of quantum information. Quantum information is an emerging field of physics that takes advantage of phenomena that are particular to quantum mechanics - such as uncertainty, superposition and entanglement - to code, transmit or process information (see Physics World March 1998). Recent highlights in this field include quantum cryptography (which can be used to achieve unconditionally secure key distribution) and quantum computing, which considerably speeds up the solution of problems that are exponentially difficult. These problems include the factorization of large numbers and searches of large databases.

Although most proposals for processing quantum information to date concentrate on single-photon or single-spin implementations, optical solitons may offer an alternative that is easier to handle experimentally, yet still provides many of the basic quantum features that are displayed by single quanta. This could lead to new paradigms for computation and communications. In particular, the existence of quantum correlations in the fluctuations of the spectral and temporal sidebands of the solitons turns them into macroscopic quantum objects with internal entanglement. If these internal quantum correlations can be tailored into prescribed patterns, it might be possible to use solitons as "quantum signatures" and have completely secure transmissions.

Another interesting feature is that the interaction of two solitons puts them into an "entangled" state in which quantum mechanical correlations ("brotherly bonds") exist between two spatially separated objects. This has already been exploited for quantum non-demolition measurements by Friberg's group at NTT, and could also possibly lead to quantum devices such as "controlled-NOT" gates. These gates form the basis of quantum computing.

Outlook

The possibilities that are opened up by the quantum mechanical nature of the optical soliton, and by the exploitation of the brotherly bonds that exist among its photons, are vast but still too early to assess. We can expect, nevertheless, that the research on the quantum properties of solitons will have a large impact on information transmission and processing - just as an understanding of the family structure and sociology of migrating birds gave man the idea to use homing pigeons to carry messages. Indeed, this was the basis of long-distance high-speed information transmission from the time Noah set foot on dry land until radio waves took over, four millennia later.

About the author

Izo Abram is in the Centre National d'Etudes des Télécommunications (CNET), 196 Avenue Henri Ravera, F-92220 Bagneux, France.

Further reading

N Doran and I Bennion 1996 Optical networks to span the globe Physics World November p35 P D Drummond, R M Shelby, S R Friberg and Y Yamamoto 1993 Quantum solitons in optical fibres Nature 365 307 S R Friberg, S Machida and Y Yamamoto 1992 Quantum non-demolition measurement of the photon number of an optical soliton Phys. Rev. Lett. 69 3165 S R Friberg et al. 1996 Observation of optical soliton photon-number squeezing Phys. Rev. Lett. 77 3775 M N Islam 1992 Ultrafast Fibre Switching Devices and Systems (Cambridge University Press) M Rosenbluh and R M Shelby 1991 Squeezed optical solitons Phys. Rev. Lett. 66 153 J Ryan and M Fox 1996 Semiconductors put the squeeze on light Physics World March p40 S Schmitt et al. 1998 Photon-number squeezed solitons from an asymmetric fibre-optic Sagnac interferometer Phys. Rev. Lett. 81 2446 S Spälter et al. 1998 Observation of multimode quantum correlations in fibre optical solitons Phys. Rev. Lett. 81 786 M J Werner 1998 Quantum soliton generation using an interferometer Phys. Rev. Lett. 81 4132

1: Solitons and noise


A coherent soliton can be represented as a superposition of a classical hyperbolic secant light pulse and the quantum fluctuations of the field (left). The quantum fluctuations or "noise" lead to uncertainties in the soliton's position in time and space, its central frequency, its photon number or electric-field amplitude, and the phase of its electric field. (a) The frequency uncertainty, coupled with the frequency-dependent refractive index of the fibre, causes the pulse to "jitter" in its time-window. The photon-number uncertainty is responsible for the shot noise observed when coherent light is detected.
(b) The photon-number uncertainty, coupled with the fibre nonlinearity, also causes the phase of the pulse to spread. (From Drummond et al.)

Solitons show up in uranium (转载)

Solitons show up in uranium (转载)

转载自http://physicsworld.com/cws/article/news/24567

Solitons show up in uranium

Scientists have observed highly localized solitary vibrations, or solitons, in a three-dimensional solid for the first time. The solitons exist in crystals of uranium heated to temperatures of 450K. Although they were predicted to exist in 3D solids some 20 years ago, conclusive evidence for them has never been obtained until now (Phys. Rev. Lett. 96 125501).

Solitons are stable localized waves that propagate through a medium without spreading. They were first observed by the Scottish scientist John Scott Russell in 1834, who was watching horses drag a barge along a canal. When the boat suddenly stopped, a wave of water continued along the canal without changing shape or slowing down.

Michael Manley of the Los Alamos National Laboratory and colleagues in the US and Germany have now observed solitons in crystals of uranium. The team obtained its results by firing beams of neutrons and X-rays into the material, which create or absorb vibrational energy from the crystal. They were then able to determine the frequency and wavelength of the crystal's vibrations, or phonons, by measuring the properties of the scattered beam.

When the crystal was heated to 450K, Manley and co-workers found a new type of long-lasting phonon that does not spread throughout the crystal. The team found that the vibrations, which have a wavelength as small as the spacing between two atoms in the crystal, form randomly throughout the material. "The vibration was not allowed by the long range crystal symmetry, indicating that there was a local break in the symmetry, which told us that it was localized", Manley told PhysicsWeb.

Solitons have broad implications from everything from devices that make use of localized energy waves to new bond breaking mechanisms in biological processes. "However, my interest at the moment is trying to understand how solitons change the mechanical properties of materials," says Manley. "Our understanding of mechanical deformation is based on the movement of crystal defects. These localized vibrations are, in effect, a new kind of defect and they seem to play a role in determining the deformability of uranium."

论文投稿前的经典28个细节检查

论文投稿前的经典28个细节检查 英文论文投稿前的经典28个细节检查 本贴地址:http://www.chemj.cn/viewthread.php?tid=4712

CHECKLIST TO USE BEFORE SUBMITTING A PAPER TO A JOURNAL
 
Have you --------------?
1 spell checked the whole paper?
2 rewritten your paper at least three times?
3 stopped working on your paper for a day?
To see and hear your words better when you look at it again.
4 put your main point into your title?
5 put your most significant findings first? Your gold first?
6 made it easy for readers to tell from your title and your abstract what is new and important about your work?
7 made sure all your verbs and subjects match?
Plural verbs have plural subjects? Singular verbs have singular subjects?
8 spelled the same name exactly the same way throughout your paper?
NOT “Bragg. . . .Brag”
BUT BRAGG every time!
9 asked a friend or a native English speaker to read your paper and tell you what’s confusing or unclear?
10 changed nouns to adjectives when necessary?
NOT “three dimension ordered array”
BUT “three dimensional ordered array”
11 used active verbs rather than passive verbs as much as possible?
NOT “The effects were investigated. . .”
BUT “We investigated the effects”
12 found a way to break a sentence that’s much too long (over 4 lines) into two sentences?
13 broken up a paragraph that is way too long into two paragraphs?
14 tried to reduce your paper to its skeleton by making a one page outline of it?
Might help you see if your paper is organized in the best possible way.
15 Made all equivalent items look the same?
NOT “scheme 1 . . . .Scheme 2”
BUT “Scheme 1. . . Scheme 2”
16 removed all contractions, such as “can’t” or “couldn’t”? and changed them to “cannot” or “could not”?
17 checked the columns of numbers in your Tables and made all the decimal points in the same column line up vertically?
18 put a noun right after “this” or “these” every time you use one of those words?
19 moved “however” away from the beginning of sentences to a spot later in a sentence where it sounds better?
20 made all your abbreviations the same?
NOT 48 hrs 3 hours 2 h five h
BUT 48 h 3 h 2 h 5 h
21 used strong definite words?
NOT “We have been interested in”
BUT “We have focused on”
22 used parallel wording where you lead your readers to expect it?
NOT “not only for fabricating. .but also for reduction”
BUT “not only for fabricating. . .but also for reducing. . .”
OR “not only for the formation of. . .but also for the elimination of. . “
Don’t mix words ending in “ing” with “ion” words.
23 proofread your paper 3 times? At least!
24 read your paper aloud to yourself?
25 Did you use “later” when you meant “latter”?
26 looked for fruit in your figure captions?
A fig is a fruit you can eat, but “Fig.” is the correct abbreviation for “Figure.” Don’t forget the period in the abbreviation.
27 proofread your references? Made sure that a journal title, no matter how often it occurs, is always spelled the same way?
28 followed the reference format for the journal you are submitting to?

Optics Express TOP10 downloaded_耗散型矢量孤子

Optics Express TOP10 downloaded_耗散型矢量孤子
刚才发现我们最近在Optics Expres上发表的一篇文章下载次数忝居第三




在孤子的最新研究中,耗散孤子越来越受到人们的重视
其与传统哈密顿孤子不同之处在于耗散型孤子的形成主要有增益和损耗的平衡而产生的,传统哈密顿孤子则认为色散和非线性的平衡而产生的。但是,随着研究的深入,人们发现如果单纯用色散和非线性的抵销来解释孤子的形成是比较肤浅的。
比如,在全正色散的光纤中,亮孤子也是能够形成的。如果按照传统观点,这是不可能的。
所以,人们尝试着提出
耗散孤子,只要系统的增益和损耗达到动态的平衡,就能产生孤子。
对于矢量孤子而言,本文介绍了耗散型矢量孤子,希望该研究能扩展孤子的基本概念。

注:现在提到的孤子概念不同于数学意义上的具有Sech2的轮廓结构。而是一种广义的孤子,只要是某种非线性波在传播的过程中保持不变就可以成为
孤子。它们的具体形状可以是千差万别。比如本文的耗散型矢量孤子,其具体形状已经不能用Sech2 来近似,而必须用高斯函数来近似(因为它们有较强的chirp)

http://www.sciencenet.cn/m/user_content.aspx?id=209095

Publication List

Publication List

1. H. Zhang, D. Y. Tang, L. M. Zhao, X. Wu and H. Y. Tam, “Dissipative vector solitons in a dispersionmanaged cavity fiber laser with net positive cavity dispersion”,Optics Express, Vol. 17, Issue 2, pp. 455-460.[Full-text PDF]

Top 10 downloaded articles in Optics Express [See]

2. L. M. Zhao, D. Y. Tang, H. Zhang, X. Wu, C. Lu and H. Y. Tam,“Period-doubling of vector solitons in a ring fiber laser” Optics Communications,281, 5614-5617 (2008). [Full-text PDF]

3. D. Y. Tang, H. Zhang, L. M. Zhao and X. Wu, “Observation of high-order polarization-locked vector solitons in a fiber laser,Physical Review Letters, 101, 153904 (2008).[Full-text PDF]

4. H. Zhang, D. Y. Tang, L. M. Zhao and N. Xiang, “Coherent energy exchange between components of a vector soliton in fiber lasers”, Optics Express, 16,12618-12623 (2008).[Full-text PDF]

Top 10 downloaded articles in Optics Express [See]

5. H. Zhang, D. Y. Tang, L. M. Zhao and H. Y. Tam, “Induced solitons formed by cross polarization coupling in a birefringent cavity fiber laser”, Optics Letters, 33, 2317-2319.(2008).[Full-text PDF]

6. L. M. Zhao, D. Y. Tang, H. Zhang, X. Wu, “Polarization rotation locking of vector solitons in a fiber ring laser,” Optics Express, 16,10053-10058 (2008).[Full-text PDF]

7. L. M. Zhao, D. Y. Tang, H. Zhang, X. Wu, and N. Xiang, “Soliton trapping in fiber lasers,” Optics Express, 16,9528-9533.(2008).[Full-text PDF]

8. L. M. Zhao, D. Y. Tang, X. Wu, H. Zhang, “Period-doubling of gain-guided solitons in fiber lasers of large net normal dispersion,” Optics Communications, 281, 3557-3560 (2008).[Full-text PDF]

9. L. M. Zhao, D. Y. Tang, X. Wu, H. Zhang, C. Lu and H. Y. Tam, “Dynamics of gain-guided solitons in a dispersion-managed fiber laser with large normal cavity dispersion,” Optics Communications, 281, 3324-3326 (2008).[Full-text PDF]

10. L. M. Zhao, D. Y. Tang, H. Zhang, T. H. Cheng, H. Y. Tam, and C. Lu, “Dynamics of gain-guided solitons in an all-normal-dispersion fiber laser,” Optics Letter, 32, 1806-1808 (2007). [Full-text PDF]

11. Qiaoliang Bao, Han Zhang, Chunxu Pan. “Simulation for growth of multi-walled carbon nanotubes in electric field”, Computational Materials Science, 2007, 39(3): 616-626.[Full-text PDF]

12. Qiaoliang Bao, Han Zhang, Chunxu Pan. “Electric-field-induced microstructural transformation of carbon nanotubes”, Applied Physics Letters, 2006, 89: 063124. [Full-text PDF]

The paper was selected for the August 28, 2006 issue of Virtual Journal of Nanoscale Science & Technology.

13. Han Zhang, Qiaoliang Bao, Chunxu Pan. “Electrical Force Induced Growth of Well-aligned Carbon Nanotubes and Simulation”, Journal of Chinese Electron Microscopy Society, 2006, 25 (supp):25-26.(in Chinese)

14. Qiaoliang Bao, Xiang Ran, Han Zhang, Xiang Qi, Qiang Fu, Chunxu Pan. “Synthesis of Well-aligned Unentangled Carbon Nanotubes on Pulse Electrodeposited Ni Nanocrystalline”, New Carbon Materials, 2008, 23(1):44-50. (in Chinese)

15. Qiaoliang Bao, Han Zhang, Chunxu Pan. “Influence of Electrodeposited Nickel Nanocrystalline on Carbon Nanotubes Growth.”, Journal of Chinese Electron Microscopy Society, 2006, 25 (supp):59-60. (in Chinese)


PRL更难中了:PRL编辑部决定将PRL数量减少一半

转载自http://bbs.whu.edu.cn/bbstcon.php?board=Physics&gid=1103389810

Dear Divisional Associate Editor,

For some time now the readers and Editors of PRL have concluded that it
publishes too many manuscripts. As you may know from the discussions at
our DAE dinner meetings at the March, April and other APS meetings, the
DAEs also largely share this view. The reasons are the following:

1) PRL is in danger of seeing the best new research results going to
Nature, Science, and in recent months, Nature Physics, and other Nature
journals.

PRL might become insufficiently selective to be attractive to authors
for the"best" papers.

2) The growth of PRL in recent years has made the journal unwieldy to
read, even in the areas of one's particular interests.

3) As the journal becomes larger, it unavoidably tends to be viewed as
no longer a distillation of the best research results.

The Editors believe that it is now appropriate to raise the standards
for acceptance in PRL and are launching an effort to reduce the weekly
size significantly. We aim at an ultimate reduction of something like
50%.

A statement of the criteria for PRL is attached. They are not
fundamentally different from the previous ones. The difference lies in
the rigor with which they are applied. It is this increase in the rigor
that will provide the higher selectivity we seek.


Your task in support of this effort is crucially important. We ask the
DAEs to consider specifically in their report whether or not the paper
would more appropriately be published in a more specialized journal, or
to provide reasons why it should be published in PRL.

There will be papers that we would have accepted that will, with the new
higher standards, be deemed inappropriate for PRL. These may, probably
will, be appealed. It is clear that a common vision of the standards
should be held by the Editors and the DAEs. One key question for
acceptance will be "will rejection represent a significant loss for
PRL?"

We plan to send an email to all referees and authors announcing the new
criteria (described briefly below), to explain the rationale for raising
the standards, and to state the goal of a significant reduction of the
number of papers published each week. In addition we will publish an
editorial to explain these plans.

We hope to hear from you and, of course, will highlight these plans at
our DAE gatherings during the APS meetings.


Sincerely,

Jack Sandweiss
Editor and Chair
Divisional Associate Editors
Physical Review Letters